Precautions for use of cleaning machine

1. When operating the high pressure washer: always wear proper goggles, gloves and mask.

2. Always keep hands and feet away from the nozzle.

3. Always check all electrical connectors.

4. Check all fluids regularly.

5. Always check the hose for cracks and leaks.

6. When the spray gun is not used, it is always necessary to set the trigger in the safe locking state.

7. Always use low pressure to work as much as possible, but the pressure should be enough to complete the work.

8. Always release the pressure in the washer before disconnecting the hose.

9. Always drain the water in the hose after each use.

10.Never point the spray gun at yourself or others.

11. Never start the equipment before checking that all hose connections are locked in place.

12. Never start the equipment until the water supply is switched on and proper water is allowed to flow through the gun barrel. Then connect the required cleaning nozzle to the spray gun rod.

Note: do not let the high-pressure cleaning machine in the process of operation in an unattended state. Every time you release the trigger, the pump will run in bypass mode. If a pump has been running in bypass mode for a long time, the excessively high temperature of circulating water in the pump will shorten the service life of the pump and even damage the pump. Therefore, it should be avoided to make the equipment operate in bypass mode for a long time.